Ελεγκτής SC1000, 4 αισθητήρες, 4x 4-20 mA έξοδος, 100-240 V AC, καλώδιο ΕΕ

Ελεγκτής SC1000, 4 αισθητήρες, 4x 4-20 mA έξοδος, 100-240 V AC, καλώδιο ΕΕ
Αρ. προϊόντος: LXV400.99.20121
Τιμή μονάδας Επικοινωνήστε μαζί μας
Αποστολή εντός 1 εβδομάδας

More confidence in your instrument’s performance

Available exclusively on the SC1000 controller, Prognosys predictive diagnostics uses innovative multivariable diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements.

Plug and Play operation

There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.

Communication options to fit any application need

The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. The SC1000 also offers up to 12 analogue outputs for measured values and up to 12 analog or digital values from non-digital sensors.

Expandable and upgradable

The SC1000 controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.

Τι περιέχει το καλάθι

SC1000 Probe Module with installed cards (as requested), Basic User Manual, EU Power Cord

Προδιαγραφές

Analog Output: One 4-20 mA Output Module
Analogue inputs: No Input Module
Conduit for Relay Connection: Όχι
Prognosys: Όχι
RTC Module: Όχι
Αισθητήριο : 2 αισθητήρες
Αναλογικές έξοδοι: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
Βάρος : Approximately 6.5 kg (depending on configuration)
Διαστάσεις (ΥxΠxB): 250 mm x 315 mm x 150 mm
Δυνατότητες επικοινωνίας : None
Εγγύηση : 24 µήνες
Είσοδοι : Up to 12 analogue 0-20 mA, maximum impedance 500 Ohms per probe module. Additional inputs are available with additional probe modules.
Έξοδος : Up to 12 analogue 0/4-20 mA, maximum impedance 500 Ohms per probe module.
Additional analogue outputs with additional probe modules. Optional digital communcations via Modbus (RS485) and Profibus DP/V1.
Επικοινωνία : Modbus (RS485): Advanced communications/networking with PLC or SCADA system directly from analyser
Profibus DP/V1 (certified)
GSM/GPRS Quad-band cellular module (FCC and IC approved, EU and US only)
Ethernet service port, RJ45, 10 MB/s
Επιλογές τροφοδοτικού: 100-240V AC, µε EU καλώδιο τροφοδοσίας
Εύρος θερµοκρασίας Λειτουργίας: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Κατάταξη περιβλήµατος : IP65
Οθόνη: ¼ inch VGA graphical backlit TFT color Glas/Glas-Touch screen, high resistance 320 x 240 pixels
Περιοχή εµφάνισης οθόνης : 11.4 x 8.6 cm
Πιστοποιήσεις : European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
Ρελέ: Έως και τέσσερις SPDT, διαµορφώσιµες από τον χρήστη επαφές µε ονοµαστική τιµή 100 έως 230 VAC, µέγιστη αντίσταση 5 Amp ανά µονάδα αισθητήρα. Επιπλέον ρελέ διατίθενται µε πρόσθετες µονάδες αισθητήρα.
Συναγερµός : Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Συνθήκες Αποθήκευσης: -20 - 70 °C (-4 to 158 °F), 0 to 95% relative humidity, non-condensing
Τι περιέχει το καλάθι: SC1000 Probe Module with installed cards (as requested), Basic User Manual, EU Power Cord
Τρόπος στήριξης : Επιφάνεια, πίνακας και σωλήνας (οριζόντιος και κάθετος) µε προαιρετική θωράκιση από τον ήλιο
Υλικό : ABS (display module) and metal (probe module) enclosure with corrosion resistant finish