EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA

EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA
Αρ. προϊόντος: EZ3005.9800140T
Τιμή μονάδας Επικοινωνήστε μαζί μας

Reliable, Stable Measurements

Avoid downtime from unreliable ISE data caused by temperature fluctuations. The EZ3005sc stabilises both sample and electrode using a temperature controlled flow cell, eliminating measurement errors and delivering precise, repeatable chloride results operators can trust.

Lower Maintenance Effort

Minimise downtime and service costs with the EZ3005sc. Automated 2 point calibration, reagent alerts, a rugged ISE electrode, and minimal moving parts extend maintenance intervals; so operators spend less time servicing instruments and more time on plant operations.

Reduced Operating Cost

The EZ3005sc helps optimise operating costs by reducing chemical consumption and service visits. Multi stream capability monitors up to eight sample lines, lowering cost per sampling point and extending equipment life.

Designed for easy integration into existing control systems

With a wide range of analogue and digital outputs, this analyser aligns with plant specific requirements, ensuring compatibility with existing infrastructure and immediate access to real time measurement data.

Τι περιέχει το καλάθι

EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, 1 stream, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Electrode and Chloride Electrode, combined, and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)

Προδιαγραφές

Demineralised water: Does not apply
Digital outputs: Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)

Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP

RS485 communication: Profibus DP or Modbus RTU
Earth connection: Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Precision: Better than 2% full scale range for standard test solutions
Reagent Requirements: Keep between 10 - 30 °C
Validation: Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Αναλογικές έξοδοι: Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
Αποστράγγιση : Atmospheric pressure, vented, min. Ø 32 mm
Αριθµ. Ροών δείγµατος : Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Αυτόµατος καθαρισµός : Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Βαθµονόµηση : Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Βαθµός προστασίας: IP44
Βάρος : Max. 35 kg
Δείγµα: πίεση: By external overflow vessel (open to atmospheric pressure)
Διαστάσεις (ΥxΠxB): 688 mm x 460 mm x 340 mm
Εγγύηση : 24 µήνες
Εύρος µέτρησης : 2 - 100 mg/L Clˉ
5 - 250 mg/L Clˉ
10 - 500 mg/L Clˉ
20 - 1000 mg/L Clˉ
Θερµοκρασία Δείγµατος: 10 - 30 °C
Θερµοκρασία περιβάλλοντος : 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Μέθοδος µέτρησης : Discontinuous, direct measurement by combined Ion-Selective Electrode
  Ion-Selective Electrode
Όριο ανίχνευσης : 2 - 100 mg/L Clˉ: 2 mg/L
5 - 250 mg/L Clˉ: 5 mg/L
10 - 500 mg/L Clˉ: 10 mg/L
20 - 1000 mg/L Clˉ: 20 mg/L
Παράµετρος : Chloride
Παρεµποδίσεις : Bromide [(Br)-], sulphide [(S)²-], iodide [(I)-], cyanide [(CN)-] ions may interfere. Mercury [(Hg)+] must be absent. Ammonia [NH₃] and thiosulphate [(S₂O₃)²-] may interfere. Fats, oil, proteins, surfactants and tar.
Πιστοποιήσεις : CE, ETL certified to UL and CSA safety standards, UKCA
Ποιότητας δείγµατος : Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Ρυθµός ροής δείγµατος : 100 - 300 mL/min
Τι περιέχει το καλάθι: EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, 1 stream, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Electrode and Chloride Electrode, combined, and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)
τροφοδοσία : 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Υλικό : Hinged part: Thermoform ABS, Door: PMMA
Wall section: Galvanised steel, powder coated
Χρόνος κύκλου: Default: 5 minutes
Continuous: 5 minutes