EZ1025sc Manganese Colorimetric Analyser, 1 stream, 4x mA Output

EZ1025sc Manganese Colorimetric Analyser, 1 stream, 4x mA Output
Αρ. προϊόντος: EZ1025.9800140T

Trusted Equipment for Critical Operations

High-quality materials and robust engineering come together in the EZ sc Series to provide 24/7 reliability. Designed for long-term performance, it reduces breakdowns and ensures consistent operational success. Equipped with advanced Manganese monitoring, the EZ sc Series accurately analyzes Dissolved Manganese to 0.002 mg/L and Total Manganese to 0.004 mg/L. This helps maintain compliance with drinking water standards and prevents issues like staining and corrosion.

Real-Time Data for Faster Decisions

Advanced connectivity and real-time monitoring provide immediate access to actionable insights. Facilities equipped with EZ sc Series of online analysers, experience improvement in reaction times, enabling better decision-making and quicker response during critical conditions. Additionally, comprehensive manganese analysis, including Mn(II), total manganese helps facilities monitor water quality at intake points and maintain efficiency as water conditions change seasonally.

Simplified Troubleshooting with Expert Support

Built-in diagnostics and secure remote data access streamline and enhance issue resolution in the EZ sc Series. Backed by a highly responsive team of experts, it reduces operational downtime and ensures peak functionality. By identifying and resolving issues early, it helps maintain system efficiency and prevents costly downtime and repairs. It also proactively addresses industrial challenges such as corrosion and heat exchanger degradation caused by Manganese buildup.

Clear Workflows for Predictable Outcomes

The EZ sc Series simplifies implementation and operation by using standardised tools and guided workflows to ensure consistency throughout. By reducing miscommunication and establishing clear expectations, it helps eliminate process inconsistencies, promoting greater efficiency and reliability.

Τι περιέχει το καλάθι

EZ1025sc Manganese Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 3 x empty 2.5L Reagent Containers with Fittings (for Colour, Buffer & Reductor Solution) and 1 x empty 10L Reagent Container with Fittings (for EDTA Solution)

Προδιαγραφές

Demineralised water: Internal dilution option: Rinse water & Dilution water
Digital outputs: Profibus DP or Modbus RTU
Earth connection: Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Precision: Better than 2% full scale range for standard test solutions
Reagent Requirements: Keep between 10 - 30 °C
Validation: Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Αναλογικές έξοδοι: Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8
Αποστράγγιση : Atmospheric pressure, vented, min. Ø 32 mm
Αριθµ. Ροών δείγµατος : Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Αυτόµατος καθαρισµός : Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Βαθµονόµηση : Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Βαθµός προστασίας: IP44
Βάρος : Max. 35 kg
Δείγµα: πίεση: By external overflow vessel (open to atmospheric pressure)
Διαστάσεις (ΥxΠxB): 688 mm x 460 mm x 340 mm
Εγγύηση : 24 µήνες
Έξοδος : Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
Εύρος µέτρησης : No Dilution
0.002 - 0.1 mg/L Mn
0.005 - 0.25 mg/L Mn
0.005 - 0.5 mg/L Mn
0.01 - 1 mg/L Mn

Internal Dilution
0.05 - 5 mg/L Mn
0.1 - 10 mg/L Mn
0.25 - 25 mg/L Mn
0.5 - 50 mg/L Mn
0.75 - 75 mg/L Mn
1 - 100 mg/L Mn
Θερµοκρασία Δείγµατος: 5 - 30 °C
Θερµοκρασία περιβάλλοντος : 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Μέθοδος µέτρησης : Formaldoxime colorimetric method
Όριο ανίχνευσης : No Dilution
0.002 - 0.1 mg/L Mn: 0.002 mg/L
0.005 - 0.25 mg/L Mn: 0.005 mg/L
0.005 - 0.5 mg/L Mn: 0.005 mg/L
0.01 - 1 mg/L Mn: 0.01 mg/L

Internal Dilution
0.05 - 5 mg/L Mn: 0.05 mg/L
0.1 - 10 mg/L Mn: 0.1 mg/L
0.25 - 25 mg/L Mn: 0.25 mg/L
0.5 - 50 mg/L Mn: 0.5 mg/L
0.75 - 75 mg/L Mn: 0.75 mg/L
1 - 100 mg/L Mn: 1 mg/L
Παράµετρος : Manganese
Παρεµποδίσεις : The ions commonly found in water and wastewater do not interfere. Large quantities of color and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere.
Πιστοποιήσεις : CE, ETL certified to UL and CSA safety standards, UKCA
Ποιότητας δείγµατος : Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Ρελέ: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Ρυθµός ροής δείγµατος : 100 - 300 mL/min
Τι περιέχει το καλάθι: EZ1025sc Manganese Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 3 x empty 2.5L Reagent Containers with Fittings (for Colour, Buffer & Reductor Solution) and 1 x empty 10L Reagent Container with Fittings (for EDTA Solution)
τροφοδοσία : 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Υλικό : Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
Χρόνος κύκλου: No Dilution
Default: 10 min.
Continuous: 10 min.

Internal Dilution
Default: 15 min.
Continuous: 13 min.